XiXun K23 3G Asynchronous LED System Sender Card

1. One sending card can connect one HUB, will save one piece of receiving card.

2. Support 4096 gray levels for red, green and blue

3. Video hardware decoding to make sure smoothly displaying, while M-series and A-series controller supports software decoding

4. Support driver IC with PWM, such as MBI5041

5. One sending card supports more than one screen but each screen has the same size, to realize display same content in the same time.

6. One card can support 640x128 pixels maximum, fixed pixels

7. Support read back HCP4 file from led controller

8. Intelligent connection, that is exchange receiving cards in one screen without setup again, the receiving cards will display the content after exchanging

9. M-series and A-series controller only support 1, 2, 4, 8, 16 scan types, while K-series support random scan types within 1/16 scan, like 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 scan types

10.Totally new design, setup controller through software in PC

11.It has same installation holes with synchronous controller, so it is easy to change controller.

Type: cascading card

mode: K23（sending card）

Maximum pixels: 2400×160

3G modem: 3G modem onboard

3G type: WCDMA/GPRS

Hub: Standard hub, one sending card connects one hub, receiving card connects one hub

Display type: Full color

Onboard Flash: 500MB

Gray level: 65536

LED module type: Support random scan type within 1/16 scan

Communication ports: Ethernet/serial port/USB ports

Audio: USB sound card optional

Special Driver IC: Support MBI5041

Schedule on time: Support

Video formats: AVI,WMV,MPG,MOV,DAT,VOB,MP4,FLV and so on

Animation formats: Support GIF,SWF and so on

Image formats: Support bmp,jpg,gif,wmf,ico and so on

Text formats: Support txt，rtf

Text type: Single line, static text and multi-line text

Table: Support to editing table

Date and Time: Support Analog clock and Digital clock

Timing: Support countdown and Timing

Sensor: Support temperature, humidity, auto-adjust brightness, Infrared remote to change programs

Storage port: Support to expanding storage via USB

Software: LEDEditor_V10/LEDSet2.0

Stock: In stock

Hub: Standard hub, one sending card connects one hub, receiving card connects one hub